Carbide Endmills
Solid Carbide
Outside of Los Angeles
(800) 547-5244
1 - 2 - 3 - 4 - 5 - 6 - Flute Solid Carbide metric & fractional sizes available in single& double ends for finishing & roughing. Standard radius, ball, corner radius, medium & high helix type Endmills.
Available in TiN, Ticn, TiAlN coatings.
1 flute designed for composites, wood & softer ductile plastics.
2 flute recommended for maximum chip clearance at higher feed rates.
The 2 flute aluma cut can be operated at extremely high speeds for maximum chip removal in non-ferrous materials. Best for use in aluminum, zinc, plastics, & non-metals.
3 flute provides for better finishes in slotting & profiling for non-ferrous materials.
3 flute 60 degree high helix for Stainless Steel & Exotics.
4 & 5 flute will give superior finishes with increased feed rates.
5 flute 45 degree helix finishing endmills designed to maximize production capabilities.
6 flute for chatterless finishing, designed for the harder materials.
6 flute 38 degree helix for excellent shearing action, superior finish in all finsihing applications & diminsihes distrotion in critical applications, such as thin walls.
6 flute 45 degree helix designed to allow higher chip loads & feed rates, increases effective rake for greater shearing ability & helps evacuate chips up & away from work area faster.
SOLID CARBIDE
|
END MILLS 2 0R 4 FLUTE |
UNCOATED
|
COATED
|
|
| Diameter x Length of Cut x OAL inches | |||
| 1/8 x 1/2 x 1-1/2 |
$5.00
|
$7.30
|
|
| 3/16 x 5/8 x 2 |
$6.75
|
$8.20
|
|
| 1/4 x 3/4 x 2-1/2 |
$7.50
|
$10.60
|
|
| 5/16 x 13/16 x 2-1/2 |
$10.00
|
$14.70
|
|
| 3/8 x 1 x 2-1/2 |
$12.50
|
$15.10
|
|
| 1/2 x 1 x 3 |
$18.50
|
$23.40
|
|
| 1/2 x 2 x 4 |
$30.50
|
$38.20
|
|
| 1/2 x 3 x 6 |
$42.50
|
$56.10
|
|
| 9/16 x 1-1/8 x 3-1/2 |
$35.00
|
$39.50
|
|
| 9/16 x 2 x 4 |
$67.50
|
$78.40
|
|
| 5/8 x 1-1/4 x 3-1/2 |
$37.50
|
$42.70
|
|
| 5/8 x 2-1/4 x 5 |
$60.00
|
$66.40
|
|
| 5/8 x 3 x 6 |
$75.00
|
$80.70
|
|
| 3/4 x 1-1/2 x 4 |
$60.00
|
$66.40
|
|
| 3/4 x 2-1/4 x 5 |
$75.00
|
$82.25
|
|
| 3/4 x 3 x 6 |
$90.00
|
$115.50
|
|
| 1 x 1-1/2 x 4 |
$87.50
|
$95.90
|
|
ENDMILLS 6 FLUTE |
UNCOATED
|
COATED
|
|
| Diameter x Length of Cut x OAL inches | |||
| 3/8 x7/8 x 2-1/2 |
$19.00
|
25.60
|
|
| 1/2 x 1 x 3 |
$27.00
|
35.20
|
|
| 1/2 x 2 x 4 |
$42.50
|
56.75
|
|
| 1/2 x 3 x 6 |
$54.50
|
69.40
|
|
| 9/16 x 1-1/4 x 3-1/2 |
$52.50
|
63.40
|
|
| 9/16 x 2 x 4 |
$67.50
|
78.40
|
|
| 5/8 x 1-1/4 x 3-1/2 |
$60.00
|
70.90
|
|
| 5/8 x 2 x 5 |
$78.50
|
92.10
|
|
| 5/8 x 3 x 6 |
$95.00
|
111.20
|
|
| 3/4 x 1-1/2 x 4 |
$90.00
|
102.90
|
|
| 3/4 x 2-1/4 x 5 |
$110.00
|
125.80
|
|
Outside Of Los Angeles
(800) 547-5244
BOGGS TOOL & FILE SHARPENING COMPANY
14100 ORANGE AVENUE
PARAMOUNT, CALIFORNIA 90723
PHONE (562) 634-1081
FAX (562) 634-0839
OUTSIDE LOS ANGELES
(800) 547-5244